Water Tank Erection
and Maintenance
23 – 27 June 2025
Sandton Centre
Johannesburg South Africa
Register Now! Limited Seats Available!
R24,999.00 Per Delegate
Course overview:
The Water Tank Erection and Maintenance course is a comprehensive training program tailored to provide participants with deep technical knowledge and hands-on expertise in the complete life cycle of water tanks — from initial site preparation and tank erection to ongoing maintenance, inspection, and rehabilitation.
The course is designed to bridge the gap between theoretical engineering principles and practical, on-site requirements. It introduces participants to various types of tanks — including bolted steel tanks, welded tanks, concrete reservoirs, and polyethylene tanks — and delves into the specific methods and challenges involved in erecting each type.
Beyond erection, the course focuses significantly on maintenance practices critical to extending the operational lifespan of water tanks. Topics such as preventive maintenance scheduling, inspection protocols, non-destructive testing (NDT) techniques, leak detection, and emergency repairs are covered in depth.
Participants will gain hands-on insights into site preparation, tank assembly, corrosion protection, structural integrity checks, maintenance schedules, and modern technologies used in tank monitoring. Whether you are installing new tanks or managing existing assets, this course provides critical expertise to ensure long-term tank performance and water safety.
Course Objectives:
By the end of this course, participants will be able to:
• Understand different types of water tanks and their applications.
• Prepare and assess sites for tank erection.
• Apply safe and effective procedures for water tank installation.
• Interpret engineering drawings and installation manuals.
• Identify common tank faults and apply corrective maintenance techniques.
• Develop and implement preventive maintenance plans.
• Apply corrosion control and protection measures.
• Conduct inspections and prepare condition assessment reports.
• Ensure compliance with safety, environmental, and quality standards.
• Integrate modern monitoring systems for water tanks.
Who should Attend:
This course is ideal for:
• Water and wastewater engineers
• Civil, mechanical, and construction engineers
• Infrastructure project managers
• Facility maintenance officers
• Technicians and supervisors responsible for tank systems
• Contractors and subcontractors in construction projects
• Plant and utility operators
• Health and Safety Officers involved in construction projects
• Asset management professionals
• Government water utility staff
Course Outline
Module 1: Introduction to Water Tanks
• Types of water tanks (steel, concrete, fiberglass, plastic)
• Design standards and specifications
• Typical applications and industry requirements
Module 2: Site Preparation and Foundations
• Site selection criteria
• Geotechnical considerations
• Foundation types and construction methods
• Drainage and access planning
Module 3: Water Tank Erection Techniques
• Pre-assembly checks and material handling
• Step-by-step erection procedures
• Structural support systems
• Bolted vs welded tank systems
• Lifting and rigging methods
Module 4: Safety in Tank Erection
• Hazard identification and risk management
• Working at heights and confined spaces
• Lifting equipment safety
• Personal Protective Equipment (PPE) and protocols
• Emergency response planning
Module 5: Tank Commissioning
• Leak testing and hydrostatic testing
• Final inspections and quality assurance
• Certification and handover procedures
Module 6: Tank Maintenance Fundamentals
• Preventive vs corrective maintenance
• Inspection schedules and checklists
• Cleaning procedures for potable and non-potable tanks
• Detecting leaks, cracks, and corrosion
• Repair methods (patching, welding, recoating)
Module 7: Corrosion Control and Protective Coatings
• Causes and types of corrosion
• Surface preparation and coating systems
• Cathodic protection methods
• Maintenance of protective coatings
Module 8: Advanced Inspection and Monitoring Techniques
• Ultrasonic thickness testing
• Remote monitoring and smart sensors
• Structural integrity assessments
• Non-Destructive Testing (NDT) applications
Module 9: Regulatory Compliance and Standards
• Occupational health and safety regulations
• Environmental considerations
• International standards (API, AWWA, ISO, etc.)
• Documentation and record keeping
Module 10: Practical Sessions and Case Studies
• Hands-on demonstration of erection procedures
• Maintenance activities on mock-up tanks
• Review of real-world failure cases and lessons learned
End of the workshop
IN HOUSE AND ONLINE TRAINING
While both In-House and Online training can present with cost-effectiveness and time-efficacy, there are some very specific differences between in-house courses and those based online.
The demand for additional courses by individuals or groups of people is increasing. Still, it depends entirely on the preferences of a person what type of training he or she wants to receive. Online courses and in-house training carry some similarities but they are considered to exhibit some very pivotal differences too. Despite that, both types of learning can be really beneficial for attendees.
For Registration and other Training arrangements,
contact us on the detail below.
SOUTH AFRICA : +27 11 057 6001
TANZANIA Cell: +255 769 688 544
WhatsApp +27 79 574 0389
info@bmktraining.co.za / www.bmktraining.com
